DJI Ronin 3-Axis Brushless Gimbal Stabilizer
5 Vienetas Prekės
Galima užsisakyti. Nemokamas pristatymas 7 d.d.
Dėmesio: Paskutinė prekė atsargose!
The Ronin 3-Axis Brushless Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 16 pounds, Ronin uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and boasts a precision of control of ±0.02°. An IMU (inertial measurement movement) detects movement and engages the motors to react, using algorithms to differentiate between intentional movement such as pans and tracking shots from unwanted shake. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.
The Ronin supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin to install your own receiver.
As with sled and vest style stabilizers, motorized gimbal systems require balancing before use. Once balanced, you can configure the Ronin for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. Because every camera and lens combination has a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is provided so you won't have to hand-hold the rig during this process.
The included 4S lithium-polymer battery powers the Ronin for up to four hours. It is a "smart" battery, meaning power regulation and protection circuitry is built-in and there is no separate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin battery because of the smart circuitry. Two 12V DC PowerTaps and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin battery to simplify your charging regime and avoid unnecessary added weight.
A hard case is included to store and transport the gimbal and related accessories.
|Motor Type||3 x Brushless|
|Working Current||Static Current: 300 mA at 16 V
Dynamic Current: 600 mA at 16 V
Locked Motor Current: Maximum of 10 A at 16 V
|Sensors||IMU (inertial measurement unit)
|Processing||DJI 32-bit DSP processor|
|Precision of Control||±0.02°|
|Maximum Controlled Rotation Speed||Pan Axis: 90°/sec
Tilt Axis: 100°/sec
Roll Axis: 30°/sec
|Controlled Rotation Range||Pan Axis Control: 360°
Tilt Axis Control: 45° up to 120° down
Roll Axis control: ±25°
|Frequency||2.4 GHz for proprietary Ronin transmitter|
|Expandability||1 x Expansion port for third-party D-Bus/PPM receiver|
|Wireless||Bluetooth for Assistant Software|
|Wired||1 x Interface for DJI Lightbridge|
Windows (32- or 64-bit): 8, 7, XP SP3
iOS: 6.1 or above
iPhone: 4s, 5, 5s
iPod touch: 4, 5
iPad: 3, 4, mini
|Supported Camera Dimensions||Maximum depth at center of mass on camera base plate: 5.5" / 140 mm
Maximum height measured from top of camera base plate: 8.9" / 225 mm
Maximum width: 7.7" / 195 mm
|Supported Camera Weight||Up to 16 lb / 7.3 kg|
|Power Requirements||Battery Type: Ronin 4S
Battery Life: Up to 4 hours
|Power Output||2 x PowerTap with regulated 12VDC output
1 x USB type A female supplying 500 mW
|Operating Temperature||5 to 120°F / -15 to 50°:C|
|Dimensions (W x D x H)||24.4 x 11 to 18 x 19.7" / 620 x 280 to 380 x 500 mm|
|Weight||9.3 lb / 4.2 kg|
Naujasis Suunto 3 Fitness – išmanusis treniruočių laikrodis aktyviam gyvenimo būdui su novatoriškomis adaptyviomis...
Suunto spalio 17 dieną išleidžia naujus laikrodžius: SPARTAN SPORT WRIST HR BARO
Pristatatome naująją VIRB 360 veiksmo kamerą
SUUNTO TRAVERSE ALPHA kolekcija pasipildė dar dviem laikrodžiais
SUUNTO Spartan šeimą papildo naujas narys Spartan Trainer Wrist HR – lengvesnis ir...